EV Charger Installation
Rellaire adds dedicated circuits for home vehicle charging. Technicians assess panel capacity and properly size the wiring for safe vehicle charging.
Adding a Dedicated Charging Circuit for Homes in Elk Grove, Lodi and Galt
Relying on a standard household outlet can leave a vehicle short of a full charge by morning. Adding a dedicated circuit from the electrical panel to a Level Two charging station in the garage or driveway solves this issue.
This setup delivers power in far less time for daily driving needs. The process involves evaluating the existing electrical service, sizing the wiring for the specific charger load, and configuring the connections.
What to Expect With Rellaire
- Professional, prompt service. Live dispatch answers calls from 7:00 AM to 8:00 PM every day, with overnight calls answered by an AI dispatch agent and urgent calls reaching the on-call technician.
- Capable, professional technicians. Technicians diagnose the real cause of electrical issues and fix the problem rather than patching it.
- Transparent pricing. A flat $89.95 service call fee applies during business hours, with written options and pricing provided before any work begins.
- No sales pressure. The homeowner is shown the available installation paths and decides the next step.
- Proper licensing. Rellaire is licensed in California under CSLB License #1139996.
Related Services: Electrical Repair & Service, Electrical Panel Upgrades, Lighting, Outlet & Switch Installation, Whole-Home Surge Protection, Smart Home Electrical Wiring, Electrical Services and California Service Areas.
What Our EV Charger Installation Visit Includes
- Load calculation. Evaluating the main electrical panel to confirm capacity for a continuous charging load.
- Circuit sizing. Selecting the proper breaker and wire gauge for the specific charger output and run length.
- Routing path. Planning the conduit and wiring path from the panel to the garage or driveway mounting location.
- Safety requirements. Checking ground-fault protection and disconnect requirements for the specific installation.
Why Professional Installation Matters
A Level Two charger represents one of the largest continuous electrical loads in a home, making a professional installation critical. The process begins with a load calculation to verify the panel capacity. Proper installation matches the breaker, wire size, and receptacle to the specific charging equipment. A permit and inspection apply where the municipality requires them.
Our Approach: Guidance, Not Guesswork
At Rellaire, the consultation begins by listening to the homeowner to understand the exact electrical needs and daily driving habits. Technicians evaluate the existing panel and wiring to identify the real requirements rather than guessing at capacity. Every situation receives a clear explanation of what the current electrical system can handle safely.
We present the available options plainly, whether that involves a simple circuit addition, a panel upgrade, or load-management equipment. All choices come with clear, written pricing before any work begins through the RiteBid™ process. Homeowners review the details, ask questions about the technical requirements, and make an informed decision without any sales pressure. We educate, not pressure. The homeowner retains control over the final direction, choosing the setup that makes the most sense for the property and the vehicle.
Signs Your Home Needs a Dedicated Vehicle Charging Circuit
Relying on standard outlets or shared wiring for vehicle charging often presents noticeable electrical issues.
- Slow charging times from a standard household receptacle
- Breakers tripping when the vehicle charger operates
- Warm plugs or scorched marks around the outlet
- Extension cords running across the garage floor
- Adding a second electric vehicle to the household
Charger Connection and Load Management Options
Setting up a home charging station involves selecting the right connection method and managing the electrical demand.
- Hardwired stations. The charger connects directly to the dedicated circuit wiring. This setup supports higher amperage output.
- Plug-in receptacles. A dedicated heavy-duty outlet receives the charger plug. This setup requires specific receptacle types and protective breakers.
- Load management devices. Equipment that pauses the charger when other heavy appliances run. This prevents overloading the main service without requiring a full panel upgrade.
- Panel upgrades. Expanding the main electrical service capacity. This provides the necessary room and amperage for a large continuous charging circuit.
Upgrading the Electrical Panel for a Charger: How to Decide
Adding a continuous electrical load requires careful evaluation of the home electrical infrastructure. When the existing service lacks the available capacity for a new continuous load, an upgrade provides the necessary space and power. A load calculation reveals exactly how much capacity remains after accounting for the air conditioner, electric range, dryer, and general lighting.
If the calculation shows insufficient capacity, the decision often comes down to balancing electrical demand and charging requirements. A heavy-duty charger requires significant dedicated power. Upgrading the panel accommodates the new equipment while supporting future additions to the home. Alternatively, load-management modules offer a way to install the charger on the existing service by automatically monitoring and limiting total power consumption when other large appliances operate.
What You Can Safely Check Before a Technician Arrives
- Review the vehicle settings to confirm the charging times
- Look at the main electrical panel for a tripped breaker and reset it once
- Inspect the charging cable for visible damage or kinks
- Clear the area around the electrical panel and desired charger location
Common Questions About EV Charger Installation
What Is a Level Two Vehicle Charger?
A Level Two charger operates on a dedicated higher-voltage circuit to deliver power in far less time than a standard household outlet. It requires a dedicated circuit from the main electrical panel.
Can I Plug My Electric Vehicle Into a Standard Garage Outlet?
A standard outlet provides a very slow charge and is often shared with other garage devices. A continuous heavy load on a shared standard circuit can create safety risks and tripped breakers.
Does a Home Charger Need Its Own Electrical Circuit?
Yes, a charging station requires a dedicated circuit sized specifically for its continuous power draw. It cannot share wiring or a breaker with other appliances or lighting.
How Do I Know If My Electrical Panel Can Handle a Charger?
A technician performs a load calculation to assess the total power demand of the home. This calculation determines if the panel has enough capacity for the new circuit.
What Happens If My Panel Lacks Enough Capacity?
If the panel is full or undersized, options include upgrading the electrical service or installing load-management equipment that monitors power usage.
Are Permits Necessary for Installing a Home Charging Station?
A permit and inspection apply where the municipality requires them. The local building department reviews the circuit size, wiring methods, and safety components.
Is a Hardwired Charger Better Than a Plug-In Model?
Hardwired chargers support higher power output and avoid certain receptacle requirements. Plug-in models offer easier removal but require specific heavy-duty outlets and protective breakers.
Request EV Charger Installation and Get a Written Quote
Tell us what's going on and our team will confirm a visit. Every repair and install is quoted in writing before any work begins.
One Flat Service Call Fee. Then It's Your Call.
A service visit during business hours is a flat $89.95. After-hours and emergency calls are priced separately. Your technician explains what they find and gives you repair or replacement options in writing through the Rellaire RiteBid™ process before any work begins.
$89.95
Business hours. Repairs and installs are quoted in writing before work begins.
Illinois: HVAC · Plumbing · Indoor Air Quality · Smart Home · Illinois Licensed Plumbing Contractor #055-045750 California: HVAC · Electrical · Indoor Air Quality · Smart Home · CA HVAC & Electrical License #1139996 · Plumbing service in California is coming once our CSLB C-36 classification is added. Live dispatch 7:00 AM – 8:00 PM every day.
Comfort Now, Pay Over Time.
A new system shouldn't wait for a perfect month. Buy today and pay over time with convenient monthly payments, with approved credit.
- Choose 18 or 60 months special financing, with approved credit
- Convenient monthly payments
- Wells Fargo & Wisetack (IL) · Synchrony & Wisetack (CA)
Illinois special financing is issued with approved credit by Wells Fargo Bank, N.A. Equal Housing Lender. Wisetack and Synchrony financing is subject to their own credit approval and terms.
